ADAM-6300 User Manual 36
This certificate of status was changed to Trusted.
D. Go to OPC UA tab to connect this session of OPC UA server and client
again.
Click Enable Security and click Connect, the dialogue window shown,
enter root in Username and Password (default password is 00000000) and
click OK.
E. The connection of ADAM-6300 modules and Adam/Apax .NET Utility (OPC
UA client) is successful.
OPC UA tab includes Address Space, Attributes, Data Access View.
Address Space: to provide a standard way for the OPC UA Server to rep-
resent objects to the OPC UA Client. Address space is constructed of
nodes and references. Nodes contain attributes and properties, and nodes
are in the address space.
Note! ADAM-6300 supports 8 trusted certificates. User can click Delete Cer-
tificate and ADAM-6300 module will be automatically start to remove
certificates you don't needed.
To Next Page
Loading...
