ADAM-6300 User Manual 46
4.6.2 Digital input
Please see the below table for I/O channel of ADAM-6300 series.
4.6.2.1 DI mode introduction
There are two types of DI channels in ADAM-6300. The first type of DI channel only
supports DI mode, the second type of DI channel supports DI, counter, and frequency
mode. The latter channel supports 3 kHz counter input and 3 kHz frequency input.
4.6.2.2 DI configuration in OPC UA tab
1. DI mode: (Please refer below contents when you want to use DI mode)
A. Select DI_(channel)_DIValue and right click Monitor to monitor this DI sta-
tus.
Model
Analog
Input
Digital Input Digital Output
SSR /
Relay
Support DI
mode
Support DI,
counter and
frequency
mode
Support DO
mode
Support DO,
pulse output,
pulse output
continue mode
ADAM-6317 AI0~AI7 DI0~DI4 DI5~DI10 DO0~DO3 DO4~DO9 N/A
ADAM-6350 N/A DI0~DI11 DI12~DI17 DO0~DO11 DO12~DO17 N/A
ADAM-6360D N/A DI0~DI7 DI8~DI13 N/A DO0~DO5
SSR
0~7
ADAM-6366 N/A DI0~DI11 DI12~DI17 N/A DO0~DO5
Relay
0~5
To Next Page
Loading...
