ASMB-784 User Manual 16
LAN 3/4 LED Indicator
2.4 USB Power Switch
ASMB-784 allows user to set USB power between +5VSB and +5V.
When the jumper is set as +5V, the board doesn't support S3/S4.
LAN Mode LAN Indicator
1 Gbps Link on LED1 Green on (Right)
100 Mbps Link on LED1 Orange on (Right)
10 Mbps Link on LED1 N/A (Right)
Active LED2 Green flash (Left)
Jumper USB Ports
JUSB1 USB0_1 and
USB4_5
JUSB2 USB2_3,
USB6_7,
USB8_9,
USB10_11,
USB12
Note! When USB power is switched to +5V, it can't be connected with pow-
ered USB KVM.
To Next Page
Loading...
