ASMB-784 User Manual 44
Change Settings
Select optimal settings for serial port 1.
Serial Port 2 Configuration
Serial Port
“Enable” or “disable” Serial Port 2.
Change Settings
Select optimal settings for serial port 2.
Parallel Port
“Enable” or “disable” Parallel Port.
Change Settings
Select optimal settings for parallel port.
Device Mode
To change the printer port mode.
3.3.11 H/W Monitor
Figure 3.18 PC Health Status
CPU Temperature (PECI)
CPU temperature shown here is CPU T-junction temperature via PECI.
Case Open Warning
Enable/Disable the chassis Intrusion monitoring function. When enabled and the
case is opened, a warning message will show in post screen.
CPU Warning Temperature
Use this to set the CPU warning temperature threshold. When the system reaches
the warning temperature, the speaker will beep.
To Next Page
Loading...
