ASMB-784 User Manual 56
3.4.2.2 NB PCIe Configuration
Figure 3.31 NB PCIe Configuration
PEG0~2 - Genx
To configure PEG0~2 as Gen1,Gen2 or Gen3.
Enable PEG
To enable or disable the PEG.
Detect Non-Compliance Device
Detect Non-compliance PCIE device in PEG.
Program PCIe ASPM after OpROM
[Enable] : PCIe ASPM will be programmed after OpROM. [Disable] : PCIe ASPM will
be programmed before OpROM.
PEG0~2 De-emphasis Control
Configure the De-emphasis control on PEG0~2.
PEG0~2 ASPM
To control ASPM support for the PEG Device, and this item has no effect if PEG is
not the currently active device.
To Next Page
Loading...
