ICR-3241
2.5 Low Power Mode
In applications requiring low power consumption (such as solar power - not 7/24 mode)
is strictly recommended to use LPM mode prior to powering down the entire router.
LPM (Low Power Mode) is a router mode where the router is in sleep mode with minimal
power consumption; see Chapter 4.1 for the LPM consumption. The router can be woken up
from this mode by a signal applied to the BIN0 input or after a predetermined period of time.
Putting the router into LPM mode can be done using the lpm command, see Commands and
Scripts application note for more details.
17
To Next Page
Loading...
