Advantech ICR-3241 User Manual

ICR-3241
2.8 Reset Functions
Consider creating a router configuration backup before performing the router’s factory
reset.
The RST button can be used in three different scenarios:
• Reset: Hold the RST button for less than 4 seconds; the router will reboot, applying its
customized configuration. The router reset can be initiated by clicking the Reboot menu
item in the router web GUI.
• Factory Reset: To restore the default factory configuration of the router, press and hold
the RST button for more than 4 seconds. After that, the PWR LED turns off and on
again. We recommend holding the RST button for 1 second after turning on the PWR
LED.
• Emergency Factory Reset: If the router cannot boot up due to the incorrect configu-
ration, turn off the router (disconnect the power supply). Then, push and hold the RST
button, turn on the router and hold the RST button for at least 10 seconds. The router
configuration will be set to the default one.
It is necessary to use a narrow screwdriver or any other small tool to press the RST button.
Figure 19: Resetting the Router
21

Advantech ICR-3241 Specifications

General

Brand	Advantech
Model	ICR-3241
Category	Network Router
Language	English