Advantech MIO-5251 - Boot

37 MIO-5251 User Manual
Chapter 3 AMI BIOS Setup
3.1.5 Boot
 Setup Prompt Timeout
Number of seconds that the firmware will wait before initiating the original
default boot selection. A value of 0 indicates that the default boot selection is to
be initiated immediately on boot. A value of 65535(0xFFFF) indicates that firm-
ware will wait for user input before booting. This means the default boot selec-
tion is not automatically started by the firmware.
 Bootup NumLock State
Select the keyboard NumLock state.
 Quiet Boot
Enables or disables Quiet Boot option.
 Boot Option #1
Sets the system boot order.