PCM-3365 User Manual 40
3.2.5 Boot
Setup Prompt Timeout
Number of seconds that the firmware will wait before initiating the original
default boot selection. A value of 0 indicates that the default boot selection is to
be initiated immediately on boot. A value of 65535(0xFFFF) indicates that firm-
ware will wait for user input before booting. This means the default boot selec-
tion is not automatically started by the firmware.
Bootup NumLock State
Select the keyboard NumLock state.
Quiet Boot
Enables or disables Quiet Boot option.
Boot Option #1
Sets the system boot order.
Fast Boot
Enables or disables boot with initialization of a minimal set of devices required
to launch active boot option. Has no effect for BBS boot options.
New Boot Option Policy
Controls the placement of newly detected UEFI boot options.
To Next Page
Loading...
Need help?
General
