What to do if there is no power to my Advent monitor?
If your Advent monitor isn't receiving power, verify the following: * The orange wire is connected to reverse power. * The red wire is connected to accessory power. * The black wire is properly grounded to the vehicle body. * The fuse is intact and, if replacement is needed, use a fuse with the same amperage.
Why is there no image from my Advent backup camera when the vehicle is in reverse?
If you're not seeing an image from your Advent backup camera when you shift into reverse, please check: * That the camera itself is working correctly. * That the orange wire is properly connected to reverse power. * That the backup camera is connected to the correct input, CAM1.
Why can't I hear sound from my Advent camera?
If you're experiencing sound issues with your Advent camera, try the following: * Increase the volume using the MENU button. * Ensure the camera is connected with the supplied SVHS cable. * Confirm that your camera model is equipped with a microphone.
What to do if there is no image from Advent Automobile Accessories backup camera when vehicle placed in reverse?
If there's no image from the Advent Automobile Accessories backup camera when the vehicle is in reverse, first, verify that the camera itself is working. Next, ensure the orange wire is connected to reverse power. Finally, check that the backup camera is connected to the CAM1 input.
How to troubleshoot no power to the Advent Automobile Accessories monitor?
If there is no power to the Advent Automobile Accessories monitor, check the following: 1. Make sure the reverse power is attached to the orange wire. 2. Confirm that the accessory power is connected to the red wire. 3. Verify the black wire is attached to the vehicle body (ground). 4. Inspect the fuse and, if it's blown, replace it ONLY with a fuse of the same rating.
What to do if sound can not be heard from Advent Automobile Accessories camera?
If you can't hear sound from the Advent Automobile Accessories camera, try the following: 1. Increase the volume using the MENU button. 2. Make sure the camera is connected with the supplied extension cable.
How to adjust mirrored image on Advent Automobile Accessories?
To adjust the image on your Advent Automobile Accessories, including fixing a mirrored image, press the MENU button to access and modify all available settings.
General| Screen Size | 40 inches |
|---|---|
| Aspect Ratio | 16:9 |
| Response Time | 8 ms |
| Speakers | Yes |
| Power Consumption | 65W |
| Resolution | 1920 x 1080 |
| Panel Type | LCD |
| Connectivity | HDMI, VGA |
| Viewing Angle | 178°/178° |
| Input Ports | HDMI, VGA |
To Next Page
