Advent LCDM40A Installation Manual

10
Troubleshooting
Symptom
Solution
No power to the monitor
1. Check that reverse power is
attached to orange wire.
2. Check that accessory power is
attached to red wire
3. Check that black wire is
attached to vehicle body
(ground)
4. Check fuse and if blown
ONLY replace with a fuse of
the same rating.
No image from backup camera
when vehicle placed in reverse
1. Check that camera is
functioning correctly
2. Check that orange wire is
attached to reverse power.
3. Check that backup camera is
attached to input CAM1.
Image is mirrored or requires
adjustment
1. All settings are adjusted by
pressing on the MENU button.
Sound can not be heard from
Advent camera
1. Increase volume through
MENU button.
2. Ensure Camera is connected
using supplied extension cable
cable.

Advent LCDM40A Specifications

General

Brand	Advent
Model	LCDM40A
Category	Monitor
Language	English