The unit does not
measure. Readings
are too high or too low.
Pneumatic system blocked or cuff
is too tightly wrapped.
Make certain the cuff is wrapped around
your wrist correctly and re-measure.
Pressure system was unstable
before measurement.
Measure again. Stay calm. Do not move
or speak during measurement.
The cuff position is not correct.
Sit comfortably and still. Make sure the
cuff is at the same level at your heart.
An irregular heartbeat
symbol occurs.
Relax for about 5 minutes and measure
again. If the symbol appears again,
consult your physician or other health care
professional..
Unclear announcement by voice
processor
Batteries may be low. Please install new
batteries and then take a measurement
again,
Some interference in inflation or
wrong operation during measuring
Refer to the inflation step in “Taking blood
pressure” and process again.
To Next Page
