15
Hints and Tips
• If the mouse is moving erratically, change the working surface
which the mouse is operating on.
• If the software is not working properly, uninstall it and then
reboot the computer. Re-install the software.
• Never use the mouse on a glass or mirrored surface as these
surfaces will cause the mouse to fail temporarily.
• To clean the outside of your mouse, use a lint-free cloth.
Do not put moisture in any openings or use aerosol sprays,
solvents or abrasives.
Wireless Mode
• Recharge the mouse if it no longer reacts to input.
• Make sure the Dongle is plugged into a USB port and the
computer is on or try the Dongle in a dierent USB port.
• If the dongle is plugged into a USB hub, try plugging it directly
into the computer.
• If mouse performance is slow or intermittent around a wireless
network, unplug the dongle from the USB port and then
reinsert it. To reactivate the mouse, switch it to OFF position
and to ON position again using the Wireless Mode switch on
the bottom of the mouse.
• Repeat the connection procedure. You can also try moving the
mouse closer to the Dongle.
• Make sure the wireless receiver is within range and is not
blocked by too many objects.
Wired Mode
• Make sure the USB plug is fully plugged into a USB port and
the computer is on or try to use a dierent USB port.
• If mouse performance is slow or intermittent, unplug the USB
cable from the USB port and then reinsert it.
To Next Page
Loading...
