To Next PageTo Next Page
Need help?Do you have a question about the AEG 10648 and is the answer not in the manual?
General| Brand | AEG |
|---|---|
| Model | 10648 |
| Category | Remote Starter |
| Language | English |
Explains symbols and signal words used in the operating instructions and on the device.
Directs users to consult the operator's manual for further information.
Warns about the danger of bodily or fatal injury to children.
Highlights critical safety instructions and warnings with 'Danger!' notices.
Instructions for environmentally friendly disposal of equipment and packaging.
States that the equipment complies with relevant EU directives.
Details the primary purpose of the jumper leads for starting vehicles.
Specifies limitations, such as use by children or for commercial purposes.
States the manufacturer's disclaimer for damages due to improper use.
Specifies compliance with DIN 72553 and suitability for 12V systems.
Describes the leads as insulated, copper-clad aluminium with insulated clamps.
Lists the item number (10648) and lead dimensions (25 mm² / 2 x 3.5 m).
Provides engine displacement limits for petrol and diesel engines.
Details the required batteries (8 x LR 1130) for the LED light.
Emphasizes reading and following all safety instructions for future reference.
Warns about life-threatening danger to children from suffocation or strangulation.
Alerts to the risk of fatal electric shock from damaged jumper leads.
States that repairs must be performed by qualified professionals.
Lists causes for which the manufacturer is not responsible for damages.
Details actions like modification or use outside manual scope that void guarantee.
Warns about ignition sources and proper battery conditions to prevent fire.
Advises on protecting eyes from battery acid and handling precautions.
Identifies the main component of the product.
Describes the clamps used for connecting to batteries.
Identifies the integrated LED light feature.
Points to the switch for operating the LED light.
Lists essential steps to take before starting the jumpstarting process.
Details the correct sequence for connecting the red and black clamps to batteries.
Explains how to start the engine of the vehicle with the drained battery.
Provides the correct sequence for safely disconnecting the jumper cables.
Explains how to operate the integrated LED light using the switch.
Emphasizes maintaining clean leads and checking for damage before each use.
Provides step-by-step instructions for replacing batteries in the LED light.
Advises on contacting the supplier for questions or issues.
Guides on proper disposal of packaging and electrical appliances according to regulations.
