EasyManua.ls Logo

AEG 5000 Series - Interrupting and Changing Options; Cancelling a Running Programme; Opening Door to Add Garments; End of Programme Procedures

AEG 5000 Series
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The AutoSense System is not available
with all programmes such as :Wool,
Rinse, and programmes with short
cycles.
12.9 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the Start/Pause button.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pause again.
The washing programme continues.
12.10 Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to activate
the appliance.
If the AutoSense System has completed
and the water filling has already started,
the new programme starts without
repeating the AutoSense System. The
water and the detergent are not drained
out in order to avoid waste. The display
shows the maximum duration of the
programme, updating it about 20 minutes
after the starting of the new programme.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset"
position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing programme.
12.11 Opening the door - Adding
garments
If the temperature and level of the water
in the drum are too high and/or the drum
is still rotating you should not open the
door.
While a programme or the delay start
operates, the appliance door is locked. The
display shows the indicator .
1. Touch the Start/Pause
button.
In the display the related door lock indicator
goes off.
2. Open the appliance door. If necessary,
add or remove the items. Close the door
and touch the Start/Pause
button.
The programme or the delay start continues.
12.12 End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The
display shows
The indicator of the Start/Pause button
goes off.
The door unlocks and the indicator goes
off.
1. Press button On/Off to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
ENGLISH 23

Table of Contents

Related product manuals