11
Safety cut-out
Cooking surface
• If after switching on the appliance a heat setting is not set for a
cooking zone within approx. 10 seconds, the appliance automatically
switches itself off.
• If one or more sensor fields are touched for longer than approx. 10
seconds, the cooking surface is automatically switched off. ER03
flashes on the display or changes to h if there is still residual heat.
• If all cooking zones are switched off, the cooking surface automati-
cally switches itself off after approx. 10 seconds.
Control panel
3 Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel
switches all cooking zones off.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically. h is displayed.
Heat setting Switches off after
1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours
To Next Page
Loading...
