9
Switching the double ring cooking zone on and off
With the dual cooking zone the heating surface can be matched to the
size of the cookware.
3 When a heat setting is selected, both zones are switched on and the pi-
lot light illuminates.
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Setting the child safety device
3 To override the child safety device or switch it off sucessfully, the steps
must be performed immediately one after the other.
No other sensor fields must be touched between the steps described. If
the steps are performed in the wrong order, the display automatically
switches itself off.
Control panel Pilot light
Switch off Touch for 1 second goes out
Switch on Touch for 1 second illuminates
Step Control panel Display
1.
Switch on appliance (Do
not set a heat setting)
¾ / h (if hot)
2.
Touch of the front right
cooking zone and at the
same time
4 x ¾ or h
Decimal points flash
3.
Touch of the front right
cooking zone
l
Appliance switches off.
To Next Page
Loading...
Need help?
General
