A Brief Introduction
Chapter I
Straight sewing……………………………….24
Imporatant Functions Change sewing direction……………………25
Name of parts:……………………………5 Use leg wire on the needTe plate………….26
Chapter II
Right-angle drive……………………………..26
Preparation before sewing Zigzag sewing………………………………..77
Extendable………………………………..6
Chapter IV
Accessory…………………………………7 Join fabric
Power supply……………………………..8 Zigzag over-lock……………………………..28
Foot controller…………………………….8 Triple zigzag stitching……………………….29
Sewinglamp……………………………….9 Triple stretch straight stitching
Remove and attach presser foot………..l0 (Model 723)…………………………………..30
Change the needle………………………11 Button sewing………………………………..31
Thread and needle chart………………..12 Make a buttonhole…………………………..33
How to use spool holder………………...13 Buttonhole with decorative stitching……….35
Remove and attach the bobbin case…..14 Zipper insertion………………………………36
Wind the bobbin………………………….15 Blind hem……………………………………..37
Attach bobbin into bobbin case………...16
Chapter V
Machine threading……………………….17 Decorative stitching
Draw up lower threading………………..18 Shell stitchin………………………………….38
Upper threading tension………………...19 Double Action stitching (Model 723)………39
Pattern selection dial…………………….20 Net stitching (Model 723)…………………...40
Select double action stitch………………20 Box-shaped elastic stitching (Model 723)…43
Stitch length selection dial………………21 Pad stitching………………………………….42
Stitch width selection dial………………..21 Edge joining (Model 723)…………………...43
Reverse sewing button…………………..22
Chapter VI
Lower feed dog…………………………...22 Remove the shuttle and its accessories
Presser foot pressure selection dia…….23 Clean feed dog……………………………… 45
Chapter III
Oil the machine………………………………46
Start sewing Obstacle avoidance………………………….48
4
Contents
To Next Page
Loading...
