EasyManuals Logo

AEG BPS33102ZM User Manual

AEG BPS33102ZM
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Excessive spillage must be removed before the
pyrolytic cleaning. Remove all parts from the oven.
To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not pull the appliance by the
handle.
Keep the minimum distance from
other appliances and units.
Install the appliance in a safe and
suitable place that meets installation
requirements.
The appliance is equipped with an
electric cooling system. It must be
operated with the electric power
supply.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
All electrical connections should be
made by a qualified electrician.
The appliance must be earthed.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
Do not let mains cables touch or
come near the appliance door,
especially when the door is hot.
The shock protection of live and
insulated parts must be fastened in
www.aeg.com
4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG BPS33102ZM and is the answer not in the manual?

AEG BPS33102ZM Specifications

General IconGeneral
Oven sizeMedium
Oven typeElectric
Cleaning typePyrolytic
Steam cooking-
Number of ovens1
Total oven power- W
Microwave cookingNo
Oven thermostat range30 - 300 °C
Top and bottom heatingYes
Total oven(s) interior capacity72 L
Door hingedown
Cord length1.6 m
Control typeRotary
Door materialGlass
Product colorStainless steel
Control positionFront
Interior materialEnameled steel
Appliance placementBuilt-in
Current16 A
Connected load3480 W
AC input voltage220 - 240 V
Energy efficiency index (EEI)81.2
Energy consumption (conventional)0.93 kWh
Energy consumption (forced convection)0.69 kWh
Lamp typeHalogen
Bulb power40 W
Clock typeElectronic
Timer typeDigital
Package weight35200 g
Weight and Dimensions IconWeight and Dimensions
Depth568 mm
Width594 mm
Weight34000 g
Installation compartment depth550 mm
Installation compartment width560 mm
Installation compartment height600 mm

Related product manuals