7.4 How to set function: End
Time
Step 1 Set a heating function.
Step 2
- press repeatedly. - starts to flash.
Step 3
, - press to set the hour. - press to confirm.
Step 4
, - press to set the minutes. - press to confirm.
At the set end time the signal sounds for 2 min. The time setting flashes in the
display. The oven turns off automatically.
Step 5 Press any button to stop the signal.
Step 6 Turn the knobs to the off position.
7.5 How to set function: Time
Delay
Step 1 Set a heating function.
Step 2
- press repeatedly. - starts to flash.
Step 3
, - press to set the minutes for the function: Duration. - press to con‐
firm.
Step 4
, - press to set the hour for the function: Duration. - press to confirm.
- starts to flash.
Step 5
, - press to set the hour for the function: End Time. - press to con‐
firm.
Step 6
, - press to set the minutes for the function: End Time. - press to
confirm.
The display shows: the set temperature, , .
Oven turns on automatically later on, works for the set Duration time and stops at the set
End Time.
At the set End Time the signal sounds for 2 min. The time setting flashes in the display.
The oven turns off.
Step 7 Press any button to stop the signal.
Step 8 Turn the knobs to the off position.
7.6 How to set function:
Minute Minder
Minute minder can be both set when the
oven is turned on and off.
ENGLISH 13
To Next Page
Loading...
