AEG BPS355020M - How to Clean: Cavity Embossment; How to Remove: Shelf Supports; How to Use: Pyrolytic Cleaning

11.2 How to clean: Cavity
embossment
Clean the cavity embossment to remove
limestone residue after cooking with
steam.
Step 1 Step 2 Step 3
Pour: 250 ml of white vine‐
gar into the cavity emboss‐
ment. Use maximum 6% vin‐
egar without any additives.
Let the vinegar dissolve the
limestone residue at the am‐
bient temperature for 30 mi‐
nutes.
Clean the cavity with warm
water and a soft cloth.
For the function: True Fan Cooking PLUS clean the oven for every 5 - 10 cooking cycles.
11.3 How to remove: Shelf
supports
Remove the shelf supports to clean the
oven.
Step 1 Turn off the oven and wait un‐
til it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
2
1
Step 4 Install the shelf supports in
the opposite sequence.
11.4 How to use: Pyrolytic
cleaning
Clean the oven with pyrolytic cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as this
function. It can cause
damage to the oven.
ENGLISH 33