EasyManuals Logo

AEG BPS556020M User Manual

AEG BPS556020M
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Before carrying out any maintenance, disconnect the
appliance from the power supply.
WARNING: Ensure that the appliance is switched off
before replacing the lamp to avoid the possibility of
electric shock.
Do not use the appliance before installing it in the
built-in structure.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Excessive spillage must be removed before the
pyrolytic cleaning. Remove all parts from the oven.
To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
The means for disconnection must be incorporated in
the fixed wiring in accordance with the wiring rules.
Use only the food sensor (core temperature sensor)
recommended for this appliance.
2.
SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not pull the appliance by the
handle.
Install the appliance in a safe and
suitable place that meets installation
requirements.
Keep the minimum distance from
other appliances and units.
Before mounting the appliance, check
if the oven door opens without
restraint.
The appliance is equipped with an
electric cooling system. It must be
operated with the electric power
supply.
The built-in unit must meet the
stability requirements of DIN 68930.
www.aeg.com4

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG BPS556020M and is the answer not in the manual?

AEG BPS556020M Specifications

General IconGeneral
Oven sizeMedium
Oven typeElectric
Cleaning typePyrolytic
Self-cleaningYes
Number of ovens1
Total oven power3200 W
Oven net capacity- L
Oven thermostat range30 - 300 °C
Pizza making function-
Total oven(s) interior capacity71 L
AC input voltage230/240 V
AC input frequency50 Hz
Energy efficiency scaleA+++ to D
Energy consumption (conventional)1.09 kWh
Energy consumption (forced convection)- kWh
Door hingedown
Noise level48 dB
Control typeRotary
Display typeLED
Product colorBlack, Stainless steel
Control positionFront
Appliance placementBuilt-in
Clock typeElectronic
Weight and Dimensions IconWeight and Dimensions
Depth567 mm
Width595 mm
Height594 mm
Installation compartment height- mm

Related product manuals