Step 2 Remove the lid of the water drawer. Lift the
cover in correspondence with the protru‐
sion in the rear.
Step 3 Remove the wave-breaker. Pull it away
from the drawer body until it pops out.
Step 4 Wash the water drawer parts with water and soap. Do not use abrasive sponges and do not clean
the water drawer in a dishwasher.
Step 5 Reassemble the water drawer.
Step 6 Snap in the wave-breaker. Push it into the
drawer body.
Step 7 Assemble the lid. First insert the front snap
and then push it against the drawer body.
Step 8 Insert the water drawer.
Step 9 Push the water drawer towards the oven
until it latches.
11.6 How to use: Descaling
Before you start:
Turn off the oven and wait until it is
cold.
Remove all accessories. Make sure that the water drawer is
empty.
Duration of the first part: around 100 min
Step 1 Place the deep pan on the first shelf position.
Step 2 Pour 250 ml of the descaling agent in the water drawer.
Step 3 Fill the remaining part of the water drawer with water to the maximum level.
Step 4 Select: Menu / Cleaning.
Step 5 Turn on the function and follow the instruction on the display.
The first part of descaling starts.
Step 6 After the first part is over, empty the deep pan and put it back on the first shelf position.
Duration of the second part: around 35 min
Step 7 Fill the water drawer with water. Make sure there is no remaining descaling agent inside the water
drawer. Insert the water drawer.
228 ENGLISH
To Next Page
Loading...
