The Fast Heat Up decreases the heat up
time.
To turn on the Fast Heat Up press and
hold for more than 3 seconds.
If the Fast Heat Up is turned on the
display shows flashing bars.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change the
time of day only when the oven is on.
DURATION To set how long the oven works.
END To set when the oven turns off.
TIME DELAY To combine DURATION and END function.
SET+GO To turn on the oven with necessary settings with only
one press of the sensor field any time later.
MINUTE MINDER To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE
MINDER at any time and also when the oven is off.
00:00 COUNT UP TIMER To set the count up, which shows how long the oven
works. This function has no effect on the operation of
the oven. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not turned on if DURA-
TION and END are set.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows and 12:00.
"12" flashes.
1. Press or to set the hours.
2. Press .
3. Press or to set the minutes.
4. Press .
The display shows the new time.
To change the time of day press
again and again until starts to flash.
7.3 Setting the DURATION
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Press or to set the minutes for
DURATION.
4. Press or the DURATION starts
automatically after 5 seconds.
5. Press or to set the hours for
DURATION.
6. Press or the DURATION starts
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing
and time setting. The oven
turns off.
7. Press a sensor field to stop the
signal.
8. Turn off the oven.
www.aeg.com
12
To Next Page
Loading...
