AEG DCE731110M - Initial Cleaning; Preheating; Selecting an Oven; Top Oven Functions

5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
To set the Time of day refer
to "Clock functions"
chapter.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories
before the first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 Preheating
Preheat the empty oven to burn off the
remaining grease.
Preheat the two ovens. Heat up one
oven at a time.
Set the functions listed below, if
applicable.
1. Set the function and the
temperature to 250ºC.
Let the appliance operate for 1 hour.
2. Set the function
and the
temperature to 250ºC.
Let the appliance operate for 15
minutes.
3.
Set the function and the
temperature to 250ºC.
Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow is sufficient.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Selecting an oven
1. Press to turn on the oven.
2. Press again and again until the
display shows the top / main oven
indicator.
The top / main oven indicator shows
which cavity is selected.
6.2 Top oven functions
Oven function Application
True Fan Cook-
ing
To prepare tender, succulent roasts.
Pizza Setting To prepare tender, succulent roasts.
Slow Cooking To prepare tender, succulent roasts.
Bottom Heat To bake cakes with crispy bottom and to preserve food.
ENGLISH 9