AEG KM8403021 - Helpful Hints and Tips

can activate the Function Lock only when
the appliance operates.
Activating the Function Lock :
1.
Activate the appliance.
2.
Set a heating function or setting.
3.
Press again and again until the
display shows Function Lock .
4.
Press OK to confirm.
Deactivating the Function Lock :
1.
Press .
2.
Press OK to confirm.
10.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and
use it later with one press of the sensor
field.
Activating the function:
1.
Activate the appliance.
2.
Set a heating function.
3.
Press again and again until the
display shows Duration .
4.
Set the time.
5.
Press again and again until the
display shows SET + GO .
6.
Press OK to confirm.
To start SET + GO , press a sensor field
(except for
). The set heating function
starts.
When the heating function ends, an
acoustic signal sounds.
Useful information:
• When the heating function operates,
the function Function Lock is on.
• You can activate and deactivate the
SET + GO function in the Basic Set-
tings menu.
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates after some time:
• If a heating function operates.
• If you do not change the oven temper-
ature.
Temperature Switch-off time
30 °C - 115 °C 12.5 h
120 °C - 195 °C 8.5 h
200 °C - 230 °C 5.5 h
The automatic switch-off works
with all functions except Light ,
Duration and End Time .
10.6 Cooling fan
When the appliance operates, the cool-
ing fan activates automatically to keep
the surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appli-
ance cools down.
11. HELPFUL HINTS AND TIPS
The temperature and baking
times in the tables are guidelines
only. They depend on the rec-
ipes and the quality and quantity
of the ingredients used.
11.1 Advice for special
heating functions of the oven
Keep Warm
Use this function if you want to keep
food warm.
The temperature regulates itself auto-
matically to 80 °C.
ENGLISH 21