20
DELAY START
The DELAY START option allows the start of a wash programme to be
delayed. The DELAY START option can be set at 30-minute intervals. The
current time and the programme end time will be shown in the display
(e.g. 14:23 - 20:28).
SENSITIVE S
A special additional function with considerably more effective rinse
function (additional rinse cycle) an improved fabric care at the same
time (reduced drum movement). This is ideal when frequent washes are
necessary, for example in cases of highly sensitive skin. An additional
rinse cycle (RINSE+) is able to be selected in addition (see chapter “Ex-
tras”). If SENSITIVE has been set, S is displayed in the symbol row.
STAIN F
For heavily soiled or stained washing. (In-wash stain treatment prod-
ucts (salts or tablets) are drawn in at the optimum time during the pro-
gramme.) If STAIN has been set, F is displayed in the symbol row.
PRE WASH V
A cold pre wash cycle prior to the main wash cycle, which follows auto-
matically. If PRE WASH has been set, V is displyed in the symbol row.
Extras (level 3)
Use the EXTRAS button to
change to the third level.
Here you can select various
basic settings without af-
fecting the particular wash
programme. These basic set-
tings will remain active until
they are deselected.
MEMORY
Programme settings that are frequently used can be saved (e.g. LINEN/
EASY-C., 40°C, 1200 RPM spin, with TIME SAVING).
There are four memory spaces available for this purpose. The saved pro-
gramme setting will appear as an entry on the first programme page
(e.g. M1:LINEN/EASY-C.) and can be deselected as for a normal wash
programme. (See chapter “Memory: Saving a programme setting”.)
LINEN/EASY-C. 60°C
1800 RPM 10:17-12:16
ç
START
TIME SAVING)
SELECT
DELAY START
SENSITIVE
BACK
STAIN
EXTRAS PRE WASH
To Next Page
Loading...
Need help?
General
