46
The washing has not
been spun thoroughly
and water remains visi-
ble in the drum.
ATTENTION CD 2 /
PLEASE CHECK THE
WATER DRAINAGE is
showing in the display.
The outlet hose is kinked. Straighten the hose.
The maximum pump height
(outlet height 1m from the
washing machine’s installa-
tion surface) has been
exceeded.
Contact Service Force, who
will be able to provide an
adaptor kit for pump lifts
greater than 1m as a special
accessory.
The drain pump is clogged.
Switch off the machine and
disconnect the mains plug;
clean the drain pump.
For siphon connections: The
siphon is blocked.
Clean the siphon.
Problem Possible cause Remedy
To Next Page
Loading...
Need help?
General
