• Do not exceed to liquid detergent dose
indicated on the flap.
• Do not set the prewash phase.
• Do not set the delay start function.
5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
11.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The first
programme on the top right of the
programme dial is Eco 40-60, the
programme to which the information of
the energy label relates.
The indicator of the Inicio/Pausa button
flashes.
The display shows an indicative programme
duration.
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The related
indicators will light up and the given
information will change on the display
accordingly.
If a selection is not possible an acoustic
signal sounds and the display shows
.
11.6 Starting a programme
Touch the Inicio/Pausa button to start the
programme. It is not possible to start the
programme when the indicator of the button
is off and doesn't flash (e.g. programme dial
on a wrong position).
The related indicator stops flashing and stays
on.
The programme starts, the door is locked.
The display shows the indicator and the
symbol appears to indicate that it is still
possible to stop the cycle and add garments.
The drain pump can operate shortly
before the appliance fills water.
11.7 Starting a programme with the
delay start
1. Touch the Inicio Diferido button
repeatedly until the display shows the
desired delay time. On the display the
indicator shows
2. Touch the Inicio/Pausa button. The
appliance door locks and starts the
countdown of the delay start. The display
shows the indicator .
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Inicio/Pausa button to pause
the appliance. The related indicator
flashes.
2. Touch the Inicio Diferido button
repeatedly until the display shows and
the indicator
goes off.
3. Touch the Inicio/Pausa button again to
start the programme immediately.
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Inicio/Pausa button to pause
the appliance. The related indicator
flashes.
2. Touch the Inicio Diferido button
repeatedly until the display shows the
desired delay time.
32 ENGLISH
To Next Page
Loading...
