AEG LFN7G8434F - Interrupting a Programme and Changing the Options; Cancelling a Running Programme; Opening the Door - Adding Garments; End of the Programme

3. Touch the Inicio/Pausa button again to
start the new countdown.
11.8 The ProSense System load
detection
After touching the Inicio/Pausa button:
1. The ProSense System starts estimating
the weight of the load to calculate the real
programme duration. During this phase
the Extra Rápido bars
placed below
the time digits play a simple animation.
2. After about 15-20 minutes the Extra
Rápido bars disappear and new cycle
duration is displayed.
The appliance automatically adjusts the
programme duration to the load to
achieve perfect washing results in the
minimum possible time.
The ProSense System is not available
with all programmes such as :Lana/Lãs
+Seda, Aclarado/Enxag., Centrif. and
programmes with short cycles.
11.9 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the Inicio/Pausa button.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Inicio/Pausa button again.
The washing programme continues.
11.10 Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to activate
the appliance.
If the ProSense System has completed
and the water filling has already started,
the new programme starts without
repeating the ProSense System. The
water and the detergent are not drained
out in order to avoid waste.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset"
position .
2. Wait for 1 second. The display shows
.
Now, you can set a new washing programme.
11.11 Opening the door - Adding
garments
If the icon is on, you can always open the
door.
If the temperature and level of the water
in the drum are too high and/or the drum
is still rotating you should not open the
door.
While a programme or the delay start
operates, the appliance door is locked. The
display shows the indicator
.
1. Touch the Inicio/Pausa button.
In the display the related door lock indicator
goes off.
2. Open the appliance door. If necessary,
add or remove the items. Close the door
and touch the Inicio/Pausa button.
11.12 End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The
display shows
The indicator of the Inicio/Pausa button goes
off.
The door unlocks and the indicator goes
off.
1. Press button On/Off to deactivate the
appliance.
ENGLISH 33