3. Turn the filter 180 degrees in anti-clockwise
direction to open it, without removing. Let the water
flow out.
4. When the bowl is full of water, turn the filter back
and empty the container.
5. Repeat the steps 3 and 4 until the water stops to
flow out.
6. Turn the filter anti-clockwise to remove it
7. If it is necessary, remove fluff and objects from
the filter recess.
Make sure that the impeller of the pump can rotate.
If it does not rotate, contact the Authorised Service
Centre.
40 ENGLISH
To Next Page
Loading...
