The corresponding indicator above the
touch button illuminates.
8.8 Rinse
With this button you can select one of the
following options:
• Extra Rinse option
This option adds a few rinses according to
the selected washing programme.
Use this option for persons allergic to
detergent residues and in areas where the
water is soft.
This option increases slightly the
programme duration.
• Skipping wash phase - Only Rinse option
The appliance performs only the rinsing
phase, the spinning and the draining
phases of the selected programme.
The corresponding indicator above the touch
button illuminates.
8.9 Steam Finish
This option adds a steam phase followed by a
short anti-crease phase at the end of the
washing programme. The steam phase
reduces fabric creasing and facilitates the
fabric ironing.
The indicator flashes on the display during
steam phase.
The drum performs smooth movements for
about 30 minutes. The duration of the steam
phase changes accordingly to the selection.
When Steam Finish
option is set the
programme ends up with an anticrease phase
during which the drum is occasionally rotated
to prevent wrinkling. The display shows the
indicator is steady on and the indicator
starts flashing. Start/Pause button is lit as
well. At the end of the anticrease phase the
drum definitely stops, the indicator goes off,
the door unlocks. User at any moment can
terminate the anticrease phase by:
• pressing the On/Off
button for a few
seconds to activate or deactivate the
appliance;
• turning the selector knob to another
position.
A small laundry load helps to reach better
results.
8.10 Delay Start
With this option you can delay the start of a
programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by steps
of 30 minutes up to 90' and from 2 hours up
to 20 h.
After touching the Start/Pause button, the
display shows the indicator and the
selected delay time and the appliance begins
the countdown.
8.11 Start/Pause
Touch the Start/Pause button to start, pause
the appliance or interrupt a running
programme.
9. SETTINGS
9.1 Acoustic signals
To deactivate the acoustic signals when the
programme is completed touch the
and the Anti Allergy buttons
simultaneously for about 3 seconds.
The acoustic signals, they continue
operate when the appliance has a
malfunction.
ENGLISH 19
To Next Page
Loading...
