AEG LTR7P731E1 - Cleaning the Inlet Hose and the Valve Filter

WARNING!
• Disconnect the mains plug from the
mains socket.
• Do not clean the pump if the water in
the appliance is hot. Wait until the
water cools down .
• Do not remove the filter while the
appliance operates.
• Unscrew the filter slowly and gently
until the water stops flowing out. After
water has been drained, filter can be
unscrewed fully.
Always keep a rag nearby to dry up any
water spillages when removing the filter.
Proceed as follows to clean the pump:
1 2 3
4 5
13.10 Cleaning the inlet hose and the valve filter
1
2
3
21
3
4
1
90
O
90
O
ENGLISH 29