Need help?Do you have a question about the AEG PROTECT C. 2000 (S) and is the answer not in the manual?
General| Efficiency | 85 % |
|---|---|
| Noise level | 45 dB |
| Crest factor | 3:1 |
| Output power | 1400 W |
| Power factor | 0.96 |
| Input frequency | 50/60 Hz |
| Maximum current | 10 A |
| Output power capacity | 2 kVA |
| EMI/RFI noise filtering | Yes |
| Input operation voltage (max) | 300 V |
| Input operation voltage (min) | 160 V |
| Output operation voltage (max) | 230 V |
| Output operation voltage (min) | - V |
| Output voltage Total Harmonic Distortion (THD) | 4 % |
| AC outlet types | C13 coupler |
| AC outlets quantity | 6 AC outlet(s) |
| Modem (RJ-11) ports | 1 |
| Form factor | Tower |
| Cooling type | Active |
| Battery type | Sealed |
| Compatible operating systems | Windows, Mac, Linux, Unix, Sun |
| Battery recharge time | 5 h |
| Typical backup time at full load | 10 min |
| Typical backup time at half load | 30 min |
| Bundled software | CompuWatch |
| Operating altitude | 0 - 1000 m |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Depth | 460 mm |
|---|---|
| Width | 192 mm |
| Height | 340 mm |
| Weight | 34000 g |
Importance of operating instructions for safe and proper use of the UPS system.
Compliance of instructions with specifications and limitations of warranty claims.
Guidelines for unit handling, contact info for support, and copyright notice.
Explanation of the UPS technology and its components, including a block diagram.
Detailed function of the UPS, covering rectifier, inverter, and bypass operations.
Essential safety precautions and explanation of warning pictograms used in the manual.
Detailed safety rules for installation, operation, and maintenance of the PROTECT C. UPS.
Declaration of Conformity regarding EMC and Low Voltage Directives, with standards.
Detailed specs: power, input/output, battery, dimensions, weights.
Procedures for checking the UPS upon delivery for damage and completeness.
Advice on selecting an optimal location for the UPS, considering ventilation and environment.
Visual representation of the front panel of various PROTECT C. UPS models.
Explanation of status indicators, LEDs, and push buttons on the UPS front panel.
Diagrams illustrating input/output ports and connectors on the rear of the UPS unit.
Instructions for physically positioning the UPS and external battery units for stability.
Guidance on connecting multi-battery packs to enhance backup duration.
Steps for connecting the UPS to mains power and initiating the power-on sequence.
Interpretation of LED indicators for normal operation, battery status, and faults.
Guide to identifying and resolving common UPS problems using error messages and troubleshooting tables.
Details on the automatic battery charging process and estimated charging times.
Schedule for visual checks, battery, and fan inspections to ensure longevity.
Instructions for storing the UPS system to prevent damage and maintain battery health.
Steps for disassembling the system in reverse order of installation.
Procedures for disposing of UPS components according to environmental regulations.
Definitions of key technical terms and acronyms used throughout the operating manual.
To Next Page