AEG PROTECT C. 2000 (S) - UPS Display and Controls

22
4.3.2 Display
Explanations:
1. OFF-Pushbutton (OFF)
2. ON-Pushbutton (ON) / Alarm off
3. Orange LED bypass (Bypass)
4. Green LED inverter (Inverter)
5. Orange LED for battery (Battery)
6. Green LED for utility power (Line)
7. - 11. Bar graph LEDs (7-10 green / 11 orange) for
UPS battery utilization respectively capacity
(remaining autonomy time)
7. LED load (0-35%) battery capacity (96-100%)
8. LED load (36-55%) battery capacity (76-95%)
9. LED load (56-75%) battery capacity (51-75%)
10. LED load (76-95%) battery capacity (26-50%)
11. LED load (96-105%) battery capacity (0-25%)
12. Red LED fault (Fault)
You will find detailed explanations of the displays on page 35.
1
2
3
4
5
6
7
8
9
10
11
12