Need help?Do you have a question about the AEG Protect C.2000 and is the answer not in the manual?
General| Noise level | 45 dB |
|---|---|
| Output power | 1400 W |
| Power factor | 0.96 |
| Response time | 300 ms |
| Input frequency | 50/60 Hz |
| Maximum current | 10 A |
| Audible alarm(s) | Yes |
| Output power capacity | 2 kVA |
| Output voltage Total Harmonic Distortion (THD) | 4 % |
| Interface | RS-232 |
| Networking features | Fast Ethernet |
| Output voltage note | 220 - 240V +/-2% |
| Compatible operating systems | Windows Mac OS Linux Unix Sun |
| Battery technology | Sealed Lead Acid (VRLA) |
| Battery recharge time | 5 h |
| Typical backup time at full load | 10 min |
| Typical backup time at half load | 30 min |
| Form factor | Tower |
| Certification | CE, EN 50091-2, EN 61000-3-2, EN 61000-6-3 |
| Serial ports quantity | 1 |
| Number of output IEC jumpers | 6 |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Depth | 460 mm |
|---|---|
| Width | 192 mm |
| Height | 340 mm |
| Weight | 34004 g |
Provides general safety rules and explains pictograms used in the manual.
Details specific safety warnings and precautions for the PROTECT C UPS.
Precautions for unit handling, installation, and electric shock hazards.
Covers safety for authorized persons, battery handling, and disposal.
Instructions for physically placing and setting up the UPS and battery units.
Guides on connecting external battery packs for extended backup time.
Instructions on connecting loads (consumers) to the UPS outlets.
Safety warnings for load connection and emergency shutdown function.
Steps for turning the UPS on, its initial synchronization, and switching off.
Explains how to access and interpret the UPS status display.
Explains display symbols and provides examples of different UPS status interpretations.
Guides on interpreting error messages and troubleshooting UPS malfunctions.
Lists specific alarms, their causes, and recommended actions.
Details alarms for battery status, utility power, and wiring faults.
Covers alarms for overload, voltage, frequency, short circuit, and temperature.
Provides safety precautions and procedures for replacing batteries.
To Next Page