Need help?Do you have a question about the AEG PROTECT C. 3000 (S) and is the answer not in the manual?
General| Efficiency | 88 % |
|---|---|
| Noise level | 50 dB |
| Crest factor | 3:1 |
| Output power | 2100 W |
| Power factor | 0.96 |
| Input frequency | 50/60 Hz |
| Maximum current | 16 A |
| Output power capacity | 3 kVA |
| EMI/RFI noise filtering | Yes |
| Input operation voltage (max) | 300 V |
| Input operation voltage (min) | 160 V |
| Output operation voltage (max) | 240 V |
| Output operation voltage (min) | - V |
| Output voltage Total Harmonic Distortion (THD) | 4 % |
| AC outlet types | C13 coupler, C19 coupler |
| AC outlets quantity | 5 AC outlet(s) |
| Modem (RJ-11) ports | 1 |
| Form factor | Tower |
| Cooling type | Active |
| Battery type | Sealed |
| Compatible operating systems | Windows, Mac, Linux, Unix, Sun |
| Battery recharge time | 5 h |
| Typical backup time at full load | 5 min |
| Typical backup time at half load | 16 min |
| Bundled software | CompuWatch |
| Operating altitude | 0 - 1000 m |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Depth | 460 mm |
|---|---|
| Width | 192 mm |
| Height | 340 mm |
| Weight | 35000 g |
To Next Page