Need help?Do you have a question about the AEG Protect 2.33 2.0 and is the answer not in the manual?
General| Nominal input voltage | 230 V |
|---|---|
| Output voltage THD | < 3 % |
| Operating temperature | 0 - 40 °C |
| Relative humidity | 0 - 95 % (non-condensing) |
| Output voltage | 230 V |
| Output frequency | 50/60 Hz |
| Battery type | Sealed lead-acid (SLA) |
| Communication ports | USB, RS-232 |
Details symbols and conventions used throughout the manual for warnings, safety, and information.
Refers to safety instructions provided, emphasizing careful reading before installation and operation.
Explains the core AC/DC, DC/AC double conversion principle of the UPS operation.
Details the UPS operation when the mains power is present and stable.
Describes how the UPS operates using batteries during a mains failure event.
Explains how two or more UPS units can be paralleled for redundancy or increased capacity.
Essential safety guidelines for installing the UPS, emphasizing protective earth connection.
Specific safety precautions for handling and connecting batteries, including risks of shock and short circuits.
Details on how to connect the UPS to mains power, loads, and other components.
Instructions for connecting the mains power supply to the UPS input terminals.
Guidelines for connecting the UPS output terminals to the loads.
Step-by-step instructions for connecting battery packs to the UPS unit.
Explains the importance and method of connecting protective earth and bonding terminals for safety.
Guides through the initial startup procedure for the UPS equipment.
Detailed step-by-step instructions for successfully starting up the UPS unit.
Step-by-step procedure for safely shutting down the UPS equipment completely.
Explains the function and operation of the Emergency Power Off (EPO) for a complete system halt.
Describes how to access and interpret alarm messages displayed by the UPS.
Provides comprehensive safety instructions for installation, operation, and general use of the equipment.
To Next Page