What to do if my AEG Dryer is not operating?
If your AEG dryer isn't working, make sure it's properly connected to the mains and check the fuse in your fuse box. Ensure the door is fully closed, and that you've pressed the Aan/Uit button and the Start/Pauze button. Also, check if the appliance is in standby mode; if so, push the Aan/Uit button.
What to do if AEG Dryer programme is inactive?
If a program on your AEG dryer is inactive, it might be because the water container is full. Empty the water container and then press the Start/Pauze button to resume operation.
Why does my AEG Dryer loading door does not close?
If the loading door on your AEG dryer won't close, check if the filter is correctly locked into position. Also, make sure no laundry is trapped between the door and the seal. Remove any items that are obstructing the door and then try closing it again.
How to fix unsatisfactory drying result in AEG T9DEN87CC?
If you're not getting the desired dryness with your AEG dryer, check these things: first, make sure you've selected the right program for your load. Clean the filter if it's clogged, and if you're using the Droogtegraad option, try setting it to a higher level. Don't overload the dryer, and clean the airflow slots at the bottom. Also, wipe the humidity sensor on the drum's front surface and adjust the dryness level if needed. Finally, clean the condenser.
What to do if AEG Dryer drying cycle is too short?
If your AEG dryer's cycle is too short, especially for small loads, try selecting a time programme. Adjust the time according to the load size. For drying a single item or a small amount of laundry, shorter drying times are recommended. Also, if the laundry is too dry, select an appropriate time programme or a higher dryness level (e.g., extra droog).
Why AEG T9DEN87CC drying cycle too long?
Several factors can cause an extended drying cycle with your AEG dryer. The filter might be clogged, so ensure you clean it. Also, avoid overloading the dryer. Insufficient spinning of the laundry beforehand and room temperatures outside the +5°C to +35°C range can also prolong the cycle. Optimal drying results are achieved between 18°-25°C.
Why AEG T9DEN87CC Dryer displays unexpected duration time?
The drying duration displayed on your AEG dryer is automatically calculated based on the load size and dampness. This means the appliance is working as expected.
Why I cannot change programme on my AEG T9DEN87CC?
Once a cycle has started on your AEG dryer, you cannot change the program or option. To change it, turn the dryer off and then on again. You can then select the program or option you want.
Why AEG T9DEN87CC Dryer has no wireless connection?
If your AEG dryer has no wireless connection or the connection often breaks off, first, check your wireless home network configuration and restart the router. If the problem persists, contact your wireless service provider. Also, ensure that both your smart device and the dryer are properly paired with the wireless network by repeating the connection configuration steps on both devices.
Why My AEG application connection does not work frequently?
If the connection between your AEG dryer and the My AEG application is unstable, ensure a solid connection between the dryer and your home router. Try moving the router closer to the dryer or using a wireless range extender. Avoid using a microwave oven and remote control at the same time, as the microwave can disrupt the connection signal.
To Next Page
General
