5. WI-FI - CONNECTIVITY SETUP
This chapter describes how to connect the smart appliance to the
Wi-Fi network and to link it to a mobile devices.
By this functionality you can receive notifications, monitor and
control your tumble dryer from your mobile devices.
To connect the appliance to enjoy the full range of features and
services you need:
• Wireless network at home with internet connection enabled.
• Mobile device connected to wireless network.
Fre‐
quency
2.412 - 2.472 GHz for European market
Protocol IEEE 802.11b/g/n two stream radio
Max
power
< 20dBm
5.1 Installing My AEG
When connecting the tumble dryer to the application, stand near it
with Your smart device.
Make sure that your smart device is connected to the wireless
network.
1. Go to the App Store on your smart device.
2. Download and install App My AEG .
3. Make sure you started a Wi-fi connection in the dryer. If not go to
the section below.
4. Start the application. Select the country and language and login
with Your email and password. If you do not have an account,
create a new one following the instructions in My AEG.
5.2 Over-the-air update
The App may propose an update for downloading new features.
The update is accepted via App only.
17/64
To Next Page
Loading...
