AEG T9DEN87CC - Page 50

Problem Possible cause Remedy
Unsatisfac‐
tory drying
result.
Incorrect programme se‐
lection.
Select a suitable pro‐
gramme.
1)
The filter is clogged.
Clean the filter.
2)
Droogtegraad option
was set to strijk‐
droog .
3)
Change Droogtegraad
option to a higher level.
The load was too large. Do not exceed the maxi‐
mum load size.
The airflow slots are
clogged.
Clean the airflow slots at
the bottom of the appli‐
ance.
There is some dirt on
the humidity sensor in
the drum.
Clean the front surface
of the drum.
The dryness level was
not set to the desired
level.
Adjust the dryness lev‐
el.
4)
The condenser is clog‐
ged.
Clean the condenser.
2)
50/64
TROUBLESHOOTING