AEG voxtel c110 - Caller Display and Service; Caller Display Operation

10
8.18 To delete two-touch memory records
To delete a number from a two-touch memory (0-9).
tIn standby mode, press the memory button
.
>The display shows “LoAd”.
tKey in the memory location number (0-9).
>The display shows the memory number.
tPress the delete button
to delete the stored number.
>The display shows “dEL”
8.19 Dial out a (0-9) two-touch memory number
To dial a number stored in a two-touch memory (0-9)
tLift up the handset or press the speakerphone
or dail button.
tPress the memory button
.
>The display shows “LoAd”.
tKey in the memory location number (0-9).
>The number dials automatically.
8.20 Ringer volume
The ringer high/low switch
located at the back of the base unit allows you to adjust the volume
of the ringer.
High volume
Low volume
9 CALLER DISPLAY OPERATION
VERY IMPORTANT:
To use caller display you must first subscribe to your network provider’s caller display service.
If you subscribe to a caller display service, you can see the phone number of the person calling you
before you answer and in the calls list afterwards.
The caller display information includes:
tThe caller’s number (up to 14 digits)
tThe date and time of the call
Condition of Incoming caller Information LCD Screen will display
It is a repeated call REP
It is a new call NEW
A call from someone whose number is unavailable
(for example an international call)
UNAVAILABLE
A call from someone whose number is with held
(private call)
WITHHELD
The caller display is incomplete or corrupted ERROR
Your have a new voice mail message. (this is a
network service provided by your network operator)