AEG voxtel c110 - Memory Functions

9
UK
8.10 To delete an outgoing call record
tIn standby mode, press the out button
repeatedly until the display shows the the outgoing call
record you want to delete.
tPress the delete button
to delete the outgoing record.
>The display shows the next outgoing record.
tPress and hold the delete button
for 3 seconds to delete all the outgoing call records.
>The display automatically returns to standby mode.
8.11 Mute function
tDuring a call press the mute button
.
>When the mouthpiece is muted, the “mute” symbol is shown on the display and the person at the
other end of the call cannot hear you, but you can hear his side.
tTo get back to the call, press the mute button
again.
8.12 Hold function
tDuring a call press the hold button
.
>When the hold is on, the display shows “hold”, a melody is played to line and the mouthpiece
is muted so the person at the other end of the call cannot hear you, but you can still hear them.
tTo get back to the call,press the hold button
again.
8.13 Inserting a pause in the dialling sequence
For some PABX, an access number must be dialled (usually an 0 or 9) to get an outside line, before
dialling the rest of the number.
tPress the pause button
after the access number and then dial the rest of the number you require.
This will insert a pause of about 3 seconds between the access number and the rest of the number.
8.14 Storing a number in M1-M2-M3 memories
tIn standby mode, key in the telephone number you wish to store.
>Up to a maximum 14 digits.
tPress store button
>The display shows “SAVE”
tPress the M1, M2 or M3 button to store it in the selected memory.
8.15 To delete direct records memory
To delete a number from a direct memory (M1-M3).
tIn standby mode, press the M1, M2 or M3 button.
>The display shows the memory number.
tPress the delete button
to delete the stored number.
>The display shows “dEL”
8.16 Dial out a direct memory
tLift up the handset or press the speakerphone button
then press the M1, M2 or M3 button you
want to dial.
>The number dials automatically.
8.17 Storing a number in (0-9) two-touch memories
tIn standby mode, key in the telephone number you wish to store.
>Up to a maximum 14 digits.
tPress store button
>The display shows “SAVE”
tPress a (0-9) button to store the number in the selected memory.
9