17
Contents
-
ning the package. Check the device
and all parts for damage. Do not operate a defective
device or parts.
Workshop Charger WM 15/100 A
Instructions for use
Please include all relevant documentation to other
users!
Technical data
Model WM 15/100 A
Item number 158009
Input 230 V AC, 50 Hz, 270 W
Input current max. 1.5 A
Charging voltage (max.)
6 V: 7.4 V
12 V: 14,7 V
Charging current +/-10 %
6 V DC: 2 A / 8 A
12 V DC: 2 A / 15 A
Jump start function 12 V: 100 A
Recommended
6 V:
8 Ah - 90 Ah
12 V:
15 Ah - 180 Ah
Charge indicator LED
Ambient
temperature
-20
º
C till +40
º
C
Lead-acid batteries (WET,
MF, EFB, AGM, GEL)
Normal use
The charger is intended for charging open and
rechargeable batteries (batteries) as found in cars,
boats, lorries and other vehicles, e.g.:
wet batteries (WET)
matt)
the batteries using the clamps.
The charging devices is not intended for charging
experience and/or lacking expertise. Children should
device.
This device is not intended for commercial use.
-
to improper use.
Workshop charger WM 15/100 A for 6 V / 12 V
batteries
following operating instructions. Store this manual
in a safe location. When passing the device on to
other be sure to also include all documentation.
To Next Page
Loading...
