15
Contents
-
ning the package. Check the device
and all parts for damage. Do not operate a defective
device or parts.
Workshop Charger WM 6 / WM 10
Instructions for use
Please include all relevant documentation to other
users!
Technical data
Model WM 6 WM 10
Item number 158007 158008
Input 220 - 240 V AC 50/60 Hz
Input current max. 0.7 A max. 1.0 A
Charging voltage
(max.)
bei 6 V: 7.4 V
bei 12 V: 14.7 V
Charging current
+/-10 %
6 V: 2 A
12 V:
2 A / 6 A
6 V: 2 A
12V:
2 A / 10 A
Recommended
6 V:
1.5 Ah - 6 Ah
12 V:
6 Ah - 80 Ah
6 V:
1.5 Ah - 6 Ah
12 V:
10 Ah - 120 Ah
Charge indicator LED
Ambient
temperature
-20
º
C till +40
º
C
Lead-acid batteries (WET, MF, EFB,
AGM, GEL)
Normal use
The charger is intended for charging open and
rechargeable batteries (batteries) as found in cars,
boats, lorries and other vehicles, e.g.:
wet batteries (WET)
matt)
the batteries using the clamps.
The charging devices is not intended for charging
experience and/or lacking expertise. Children should
device.
This device is not intended for commercial use.
-
to improper use.
Workshop Charger WM 6 and WM 10 for 6 V /
12 V batteries
following operating instructions. Store this manual
in a safe location. When passing the device on to
other be sure to also include all documentation.
To Next Page
Loading...
