To Next PageTo Next Page
Need help?Do you have a question about the AEM Dryflow and is the answer not in the manual?
General| Brand | AEM |
|---|---|
| Model | Dryflow |
| Category | Water Filtration Systems |
| Language | English |
Steps for preparing the vehicle before installation, including safety precautions and initial checks.
Removing air box clips and loosening initial hose clamps at air box and throttle body.
Steps for removing the vehicle battery and securing the fuse block.
Removing fender liner, washer fluid bottle, and associated components.
Removing remaining bolts securing the washer bottle and loosening the fuse block positive lead.
Installing the lower intake pipe through the fender and securing it with a spacer.
Attaching silicone hose, rubber mount, and hump hose to the intake system components.
Placing the upper intake pipe, securing cables, and installing the breather hose.
Reinstalling fender liner, wheel, washer bottle, and final checks before starting the engine.
Ensuring the C.A.R.B. exemption sticker is visible for emissions testing.
Guidelines for cleaning the air filter element and intake tubes.
Notes on installing the AEM bypass valve, including suggested cutting locations.
