To Next PageTo Next Page
Need help?Do you have a question about the Aeon Aeotec MultiSensor 6 and is the answer not in the manual?
General| Battery Life | Up to 2 years |
|---|---|
| Battery Type | CR123A |
| Wireless Technology | Z-Wave Plus |
| Power Supply | USB power |
| Z-Wave Frequency | 868.42 MHz (EU) |
| Sensors | Temperature, Humidity, Light, Motion, Vibration |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 0 to 95% RH |
| Temperature Accuracy | ±0.5 °C |
| Light Sensor | 0 to 1000 lux |
| PIR Detection Range | 7 m |
| Range | Up to 100 m |
| Compatibility | Z-Wave certified controllers |
| Installation | Wall |
Instructions for powering the MultiSensor 6 using USB or battery options.
Steps to pair the MultiSensor 6 with a Z-Wave network using various controllers.
Guidance on selecting an optimal location, considering environmental factors and sensing range.
Procedures for the physical mounting of the device using provided accessories.
Information on how the device reports its battery status and expected lifespan.
Specific advice and settings adjustments for using the MultiSensor outdoors.
How motion detection commands are sent, timing, and the process to wake the sensor.
Instructions for unpairing the device from a Z-Wave network using different controllers.
Method to check the sensor's connectivity health to the gateway via LED indicators.
Procedure for performing a manual factory reset when gateway unpair fails.
Links to external documents for more advanced device configurations.
Detailed technical specifications including power, operating temp, ranges, and accuracy.
