NanoMote Quad user guide.
Modified on: Thu, 14 Mar, 2019 at 4:05 PM
Aeotec NanoMote Quad.
Aeotec NanoMote Quad has been crafted to control connected lighting using
Z-Wave Plus
(http://aeotec.com/z-wave-
plus)
as a Z-Wave S2 device. It is powered by Aeotec’s
Gen5
(http://aeotec.com/z-wave-gen5)
technology. You can find
out
more about NanoMote Quad
(https://aeotec.com/small-z-wave-remote-control)
by following that link.
To see whether NanoMote Quad is known to be compatible with your Z-Wave system or not, please reference our
Z-Wave gateway comparison
(http://aeotec.com/z-wave-gateways)
listing. The
technical specifications of NanoMote
Quad
(https://aeotec.freshdesk.com/solution/articles/6000184697-nanomote-quad-technical-specifications-)
can be
viewed at that link.
Familiarize yourself with your NanoMote Quad.
1. NanoMote Quad
2. Micro USB port
3. Lanyard Hole
4. LED Indicator
Features:
1. Z-Wave Plus certified for good compatibility (500 serials chipset)
2. Z-Wave S2 system
3. Support remote control anywhere and anytime
4. Program up to 4 customized scenes
5. The battery is rechargeable and replacable, will run for three months per charge
6. Support low battery alarm with buzzer
7. Support Child Lock function
8. Supports OTA firmware update
Safety information.
Nano Mote Quad User Guide : Aeotec Group
https://aeotec.freshdesk.com/support/solutions/articles/6000184696-n...
To Next Page
Need help?
General
