MP2C
Manuale operativo - Operating manual MO.MP2C.518
Pag. 69
MENU RAPIDO
QUICK MENU
Set point Hysteresis Set point Hysteresis Set point Hysteresis Set point Hysteresis
SEtP 1 HySt 1 SEtP 2 HySt 2 SEtP 3 HySt 3 SEtP 4 HySt 4
SNNNNN NNNN SNNNNN NNNN SNNNNN NNNN SNNNNN NNNN
Peak
Unload
Serial
Digital
Password
Pos. / neg. On / off
Identifi.
Baude
Filter
Resolution
PASSW PEAC UnLoAd IdEnt SerIAL FILtEr rESoL
0007 P oFF NN NNNN N NNN
Fixed Decimal Sample Set Signal Set analog Reset Auto
Tare Full Scale Point Weigh Input Output Calibration Zero
tArE FS dPoInt WEIG AInP Aout RESEt Auto0
n NNNNN N NNNNN N NNN n NN
Menu Look Amplitude Full Scale Zero
On / off Adjustment Analog out Adjustment
PASSW DACA DACF dACO
3101
NNNN NNNNN NNNN
Come Impostare i Parametri:
1) ESC = esce dal menu senza modificare il parametro.
2)
§¨
= sposta il cursore lampeggiante sulla cifra da modificare.
3)
©
= incrementa la cifra selezionata dal cursore lampeggiante.
4) ENTER = memorizza il dato; mostra il passo successivo.
How to set parameters:
1) ESC = to exit from menu without modifing the parameter.
2)
§¨
= to set flashing cursor on the digit to be modified.
3)
©
=
to increase the digit selected by flashing cursor.
4) ENTER = to store the data; to display next step.
SET
ESC
To Previous Page
Loading...