To Next PageTo Next Page
Need help?Do you have a question about the Aerco INN600 and is the answer not in the manual?
General| Brand | Aerco |
|---|---|
| Model | INN600 |
| Category | Water Heater |
| Language | English |
General safety regulations and precautions for installation and operation.
Instructions for safely shutting down the unit in an emergency.
Guidelines for selecting an installation site and required clearances.
Details on gas supply piping, specifications, and external regulator installation.
Requirements and procedures for connecting AC electrical power.
Guidelines for flue gas venting and providing combustion air.
Overview of the control panel, its indicators, displays, and menu structure.
Step-by-step guide for the unit's start sequence and start/stop levels.
Prerequisites and steps for performing the initial unit start-up.
Necessary tools and instrumentation for accurate combustion calibration.
Detailed procedures for calibrating combustion for Natural Gas and Propane.
Steps for calibrating the unit's temperature control for optimal performance.
Information on accessing and setting over-temperature limit switches.
Procedures for testing low and high gas pressure fault conditions.
Steps to simulate and test low water level and high water temperature faults.
Procedures for testing interlock circuits and flame fault conditions.
Detailed table of fault indications, probable causes, and corrective actions.
List of fault messages, their descriptions, and associated causes.
